Pack the sheet.Press more.Pay less.
One 22-inch sheet, as long as you need, loaded with every logo, name, and number on your list. Build it yourself and pay $0.02 per square inch, the lowest rate in the shop.
Why gang sheets
More prints, less money.
- 01
One rate, any mix
A finished sheet is $0.02 per square inch, the best rate we offer. Ten logos or a hundred names cost the same per inch.
- 02
Every size on one sheet
Left chests, full fronts, sleeve hits, and tags can all ride together. Fill the gaps with small stuff.
- 03
Cut and press as you go
Trim off what you need for today's order and keep the rest for the next one.
Sheet pricing
Fill the sheet. Pay by the inch.
22 inches wide times your length times $0.02 for a finished sheet you upload. A 22 by 60 inch sheet is $26.40 whether it holds one design or forty. Sheets we lay out for you from individual images are $0.025 per square inch.
| Sheet size | Square inches | Price |
|---|---|---|
| 264 | $5.28 | |
| 528 | $10.56 | |
| 792 | $15.84 | |
| 1,320 | $26.40 | |
| 2,640 | $52.80 | |
| 6,600 | $132.00 |
Every sheet is 22 inches wide. Pick any length up to 300 inches.
Order a gang sheet
Two ways to get one.
Upload a finished sheet
You lay it out at 22 inches wide, we read the length and price it at $0.02 per square inch. Build it or upload it in the gang sheet builder.
Open the builder →We lay it out for you
Send the individual designs and how many of each at what size. We build the sheet, send a proof, and price it at $0.025 per square inch.
Send us the designs →Before you upload
Send print-ready art.
- Best: a PNG with a transparent background at 300 dpi, sized the way you want it printed.
- AI and PDF files work too.
- JPGs only work if the design has no background, since a JPG prints its background as a box.
- We print exactly what you send, so check for backgrounds, stray pixels and sizes before you order.
How to press
Heat, time, peel.
Polyester
140°C / 284°F
- 1.Press 12 seconds.
- 2.Cold peel the film.
- 3.Press 6 more seconds with a Teflon sheet.
Cotton
170°C / 338°F
- 1.Press 12 seconds.
- 2.Hot or cold peel the film.
- 3.Press 6 more seconds with a Teflon sheet.
Layout tips
Build it right.
- Build the file at 22 inches wide. Any length up to 300 inches.
- Transparent background, 300 dpi, PNG or AI. Same rules as a single transfer.
- Leave room between designs so you can cut them apart cleanly.
- Send the art the way you want it to read. We handle the printing side.
- Group designs by fabric when you can. Polyester and cotton press at different temperatures.
- Not sure how to lay it out? Send us the designs and the counts and we build the sheet.
Questions
Gang sheets, answered.
How is a gang sheet priced?
By the square inch. Upload a finished 22-inch sheet and it is $0.02 per square inch, so a 22 by 60 inch sheet is 1,320 square inches, $26.40, no matter how many designs are on it. If you send individual images for us to lay out, those print at the single-transfer rate of $0.025.
What length will I pay for?
The builder measures how long your layout runs and rounds up to the next 3-inch step, anywhere from 12 to 300 inches. Pack your designs close together to keep the sheet short. If you upload a finished sheet, we read the length from your file.
Can I put different designs on one sheet?
Yes. Different designs, different sizes, different colors. Anything that prints on the same film.
Do you have a drag-and-drop builder?
Yes. Click Build Your Gang Sheet, upload your designs, then drag them into place or tap Auto Build to pack them for you. The price updates as the sheet grows. Rather not lay it out yourself? Send us the designs and how many of each, and we build the sheet at $0.025 per square inch.
What is the longest sheet you print?
300 inches. Longer runs are split into more than one sheet.
How long does it take?
Two weeks standard from approved artwork. Rush is available on request.